3D Systems ProX DMP 300 Скачать руководство пользователя страница 15

Страница: 15 / 102

3D SYSTEMS, INC

PN:80-D27 Rev.B

PERSONAL PROTECTIVE EQUIPMENT

Gloves

Wear disposable nitrile gloves when handling powders . Dispose the gloves when the powder handling operation

is complete. Do not operate switches or use door handles or other fixtures while still wearing the gloves in order

to prevent cross contamination .

Clothing

When working in areas where reactive metal condensates are present, use fire-retardant special fabric, rendered

conductive, trousers without turn-ups, closed pockets .

Safety masks

Wear disposable dust mask rated FFP3 level protection (EN149:2001 - Filters at least 99% of airborne particles),

N99 (Occupational Safety and Health Administration standard - Filters at least 99% of airborne particles), or

equivalent level protection .

Safety goggles

Wear close fitting safety goggles or a full face mask when handling powder. In case of emergency, use an eye

shower to remove any particles from the eye(s) .

Safety shoes

The use of antistatic safety shoes is mandatory in any area where heavy items are handled . This includes

powder vessels and build plateform . In any area where powder is handled safety shoes with antistatic soles are

recommended .

Hygiene

It is advised to wash your hands, even when wearing gloves, after handling powder . It is also recommended to shower and

wash your hair after removing the protective clothing at the end of a day’s work.

HAND TOOLS

You must acquire non-sparking, non-magnetic hand tools that are safe for Ex zones where hazardous, flammable or

combustible vapors, liquids, dusts or residues may be present .

•

Aluminum

•

Aluminum-Bronze (AlBr)

•

Copper-Beryllium (CuBe2) alloys

You must also acquire and use natural fiber brushes and brooms. Work benches must be grounded.

GROUNDING

Grounding personnel and equipment when working with powder is highly recommended . To ensure easy, uncomplicated

operation, the following is recommended:

•

Dedicated grounding points in each process room

•

Antistatic flooring

•

Antistatic floor mats

In addition it is recommended to check the grounding itself on a regular basis .

Содержание ProX DMP 300






































































































Результаты поиска

Содержание ProX DMP 300

Отзывы:

3D Systems ProX DMP 300, Руководство пользователя, Страница: 15 / 102

Результаты поиска

Содержание ProX DMP 300

Отзывы: