3D Systems ProX DMP 300 Скачать руководство пользователя страница 35

Страница: 35 / 102

3D SYSTEMS, INC

PN:80-D27 Rev.B

D . Control panel and external control panel

Control panel

This touch screen provides a human-machine-interface for visualization of the various steps

during the manufacturing process .
The touch screen displays all controls, status indicators and positioning information from

different parts of the machine .

External control panel

Close to the control panel, an external control is used to manage the main parts & events during a manufacturing cycle:

START KEY

This key activates/deactivates the machine start command using the “ON” button.

“LASER ON” LIGHT

This light is extinguished when the laser cannot emit .

POWDER RECYCLING

This starts the powder recycling system .

UNLOCKING OF THE SLIDING DOOR AND THE AIRLOCK DOOR

This button unlocks:
•

the airlock door (10 s delay),

•

the locking system of the gloves door,

•

the sliding door .

RECOIL OF VACUUM CLEANER

This button is used to recoil the vacuum cleaner hose . When the tip of the vacuum cleaner

is correctly engaged, the hose is locked in its housing .

VACUUM CLEANER

This button starts/stops the vacuum cleaner .

BUTTON “YES”

To interact with the different preparation sequences. The “Yes” button allows any action suggested.

BUTTON “NO”

To interact with the different preparation sequences. The “No” button rejects any action suggested.

STOP

This button instantly stops all currently operating processes (power, heating element, motor, laser, etc .) . If the machine is

stopped during a sintering operation, manufacturing will be stopped immediately and may not be continued . All processes

will have to be reset .

CYCLE BREAK

This button interrupts a cycle at its completion and lets the operator choose either to continue the cycle by pressing the

button again or to end the process by pressing the stop button (layering or sintering cycles for example) .

MAIN SUPPLY PRESENT

This light indicates when the machine is powered on and started .

Содержание ProX DMP 300






































































































Результаты поиска

Содержание ProX DMP 300

Отзывы:

3D Systems ProX DMP 300, Руководство пользователя, Страница: 35 / 102

Результаты поиска

Содержание ProX DMP 300

Отзывы: