3D Systems ProX 950 Скачать руководство пользователя страница 51

Страница: 51 / 62

3D Systems, Inc.

NOTE: From time to time, you will need to switch out your TPM and IPA for fresh liquids . The type of material

you typically build with will dictate how often to do this, as all materials have different solubilities in TPM and

water . Some materials will exhaust the solvents’ effectiveness much faster than others . For either solvent, closely

monitor how well it is stripping your build of uncured material . If it is no longer cleaning build parts and/or

cleaning takes excessive effort, it is time to switch out solvents for fresh batches .

Set build platform on offload cart or other large, sturdy cart or platform to prepare for part removal.

7. With nitrile gloves on, use a putty knife or other viable tool to scrape the build’s supports off the build platform. It is best to

scrape nearer to the platform than near the part, so as not to risk damaging the build.

8. Carefully remove the build’s remaining support structures by hand.

Build parts have been blurred for privacy.

Содержание ProX 950






























































Результаты поиска

Содержание ProX 950

Отзывы:

3D Systems ProX 950, Руководство пользователя, Страница: 51 / 62

Результаты поиска

Содержание ProX 950

Отзывы: