3D Systems, Inc.
SYSTEM OPERATIONS
PRINTING A PART
Now that you are familiar with the various screens within the User Interface, you can now print your first print. Follow these
basic steps to print your first part.
NOTE: Ensure print platform is installed prior to printing a part . See
Print Platform Installation Page 36
for more
information .
13
1. Turn machine on.
2. Select Print 3D Pro (1).
3. Turn chamber lights on (1)
NOTE: This is optional, machine will build without
chamber lights on .
4. Ensure all doors are locked by verifying the
System
(1) light is
lit. If it is not, press the
System Enable
(2) button.
5. Verify the doors are locked by looking at the UI. The green lock
button should show Unlock Door if doors are locked. If not,
press this button to lock doors (3).
Home the elevator
1. Select
Tools
from main screen (4).
2. Select
Elevator/Leveler
(5).
3. If machine was not already turned on, select
Move to Home
(6). If machine has been on and used, this step is unnecessary.
Continue to next page.
1
1
2
3
4
5
6
38