3D Systems ProX 950 Скачать руководство пользователя страница 27

Страница: 27 / 62

3D Systems, Inc.

PRINT APPLICATOR SCREEN

The Print Applicator Screen allows you to operate the applicator manually.

Manual Motions:

Move to Home:

Move the print applicator to its

home position.

Move:

To manually move the print applicator:

•

Set the

Move Distance

and

Velocity

to the

desired value by using the edit button.

•

When these values are satisfactory, press the

Move

button to activate manual motion.

Vacuum OFF:

Switch the print applicator vacuum

on and off.

Remove Bubbles:

Runs a predefined operation to

remove bubbles on the material surface.

Applicator Calibration:

Runs a predefined

operation to calibrate the print applicator system.

Stop:

Stops the current manual motion and

operation.

Forward:

Manually move the print applicator

towards the front of the system. Press and hold to

move.

Rear:

Manually move the print applicator to the

rear. Press and hold to move.

Reset Home:

This recalibrates the home positions

of the left and right sides. This will need to be

used if the left and right side motors of the print

applicator blade get out of synch.

Parameters

Current Position:

Shows the current position of

the print applicator relative to the home position.

Move Distance:

Amount to manually move the

print applicator. Set this value using the edit
button

Velocity:

Specifies the print applicator speed, in

inches per second, during manual motion. This
setting does not affect the applicator speed
during printing. Set this value using the edit
button

Back:

Navigate back to the

Tools Menu Screen

Содержание ProX 950






























































Результаты поиска

Содержание ProX 950

Отзывы:

3D Systems ProX 950, Руководство пользователя, Страница: 27 / 62

Результаты поиска

Содержание ProX 950

Отзывы: