3D-ONE CP31, Руководство по эксплуатации, Страница: 16 / 53

Ov
erview
8.
Camera controls
1.
buttons in the top left/right corners.
Buttons can be turned on/off by tapping
them once. A simple toggle button will
light green when in the ON position. A
function change button will indicate the
selected function by displaying a text
and highlighting one state in orange.
RECORD buttons (13) &
(17)
17.
13.
The CP31 camcorder has two RECORD
start/stop buttons, one located near the
handle, one on the rear. They function
identically: To start recording press one
of the once and both will lit red. To stop
recording press the button once more.
AUDIO GAIN controls
(19a)
19.
20b.
20a.
With the 4 AUDIO GAIN potentiometers
you can adjust the gain of the left
and right channels of the internal
MICROPHONE (INT MIC) and of the
external microphones (EXT MIC)
connected using the XLR connectors.
Every AUDIO GAIN potentiometer has
a corresponding PEAK LED to indicate
clipping of the audio signal.
48V+ buttons (20a)
Enables provision of phantom power
(+48 V DC) on the corresponding XLR
output.
CAUTION
PROVIDING 48V DC TO EQUIPMENT
NOT DESIGNED TO HANDLE 48V MIGHT
RESULT IN PERMANENT DAMAGE TO THAT
EQUIPMENT.
PAD button (20b)
The two PAD buttons are used to
attenuate the input of an external
microphone, that is to bypass the
internal microphone preamp.
ZOOM control (22a)
22.
a
b
The zoom position of both optics
can manually be adjusted using the
potentiometer switch labelled ZOOM.
You can adjust the zoom from 1.0 x to
12.0 x by actuating the switch.
NOTE:
When the vergence is not set to infinity,