3Com OfficeConnect WX4400, Справочное руководство

Страница: 256 / 528

256 C
HAPTER
7: C
ONFIGURING
W
IRELESS
P
ARAMETERS
21 If you selected MAC Access in step 8, select or create the MAC address globs
you want to allow to access the voice VLAN. Otherwise, go to step 23.
To create a new rule:
a Click Create .
b Specify the MAC address glob in the Matching MAC Glob box. To
match on all MAC addresses, leave the wildcard (*) in the box. (For
syntax information, see “Access Rules” on page 248.)
To use an existing rule, leave the rule in the list.
22 Select or create the radio profile to map to this service profile.
By default, the default radio profile is selected.
„
To map the service profile to the default radio profile, leave default
selected and go to step 23.
„
To map the service profile to a different radio profile, select the radio
profile and go to step 23.
„
To create a new radio profile:
a Select Create new Radio Profile and click Next .
b Type the radio profile name in the Name box and click Next .
c Select the radios you want to manage with the radio profile and click
Move to move them to the Current Members list.
If you have not planned RF coverage or configured any MAPs in the
network plan yet, no radios are listed. You can add the radios later.
(Select the radio profile, click
Properties , then select Radio Selection. See
“Configuring Advanced Radio Profile Settings” on page 274.)
d Go to step 23.
23 Click Finish .
The service profile appears in the service profile table.
Configuring a
Web-Portal
(WebAAA) Service
To configure a Web-Portal (WebAAA) service:
1 Access the Web-Portal Service Profile wizard:
a In the Organizer panel, click on the plus sign next to the WX switch on
which you want to configure the service profile.
b Click on the plus sign next to Wireless.