B
C
ONFIGURING
Y
OUR
W
ORKSTATION
TO
B
E
A
DHCP C
LIENT
Workstation Configuration Using DHCP Smart Mode
If you have chosen to utilize
DHCP Smart Mode
, you will
need to configure some parameters on your workstation.
You should set up the workstations on the OfficeConnect
Remote 812’s LAN to automatically obtain their IP address.
This is the default setting in Windows 95.
If you have configured IP addresses manually on your LAN,
you should use the following procedure on each
workstation to allow them to automatically learn the new
addresses instead
The following is an example of this procedure on a
workstation running Windows 95.
1
Open the Control Panel. Select
Network > Configuration
> TCP/IP
to access the TCP/IP Properties Menu.
Select the
Gateway
tab. Remove any IP addresses in the
Installed Gateways
field.
