1-4
C
HAPTER
1: G
ETTING
S
TARTED
Administrative Login profile, User Name:
root
and
Password:
!root
Option Two: Default Bridge Mode
Use this mode if you want the Remote 812 to function as a
bridge automatically, with no special configuration. You
will not be required to use the Setup Wizard or install any
software from the CD unless you want to change the
configuration or if you would like to use Instant Update in
the event a software update to your Remote 812 is posted
on 3Com’s web site (you can install from the CD at any
time).
Verify the VPI/VCI settings in the table above match values
your Service Provider has given you. The Remote 812 will
power up with the following configuration:
Bridge network on the LAN Interface
A remote site profile named “bridge” is set up to bridge
all traffic with RFC 1483 encapsulation on the specified
VPI/VCI.
Spanning Tree Disabled
Administrative Login profile: User Name:
root
and
Password:
!root
Option Three: Unconfigured Mode
Set all switches to OFF to boot your unit in Unconfigured
Mode. You must set all of the configuration parameters.
This allows you complete flexibility with your configuration.
