IP Testing
3-3
problems are resolved, continue to the IP testing section
below.
IP Testing
Run a PING to make sure the OfficeConnect Remote 812
can reach the remote router. You can PING by using the
OfficeConnect Remote 812 Manager, from MS-DOS, or
test the connection through your Internet Service Provider.
PINGing from the OfficeConnect Remote 812 Manager will
test the connection from the OfficeConnect Remote 812 to
the network.
The DOS PING will check the connection from your PC
through the OfficeConnect Remote 812 ADSL Router to
the network.
You can also test the connection using your Internet
Browser, if you have Internet access.
Option 1: OfficeConnect Remote 812 Manager Ping to ISP or
Remote Site Network
Open the OfficeConnect Remote 812 Manager, select
Tools
> Ping
. Enter the address you wish to ping, whether
it is the ISP or a remote site. Press the
Submit
button.
A Ping Response screen will appear, with the response from
the ping. The following responses may occur.
Ping Responses
<IPAddress> is alive
The PING was successful.
If a name was entered in the Ping page input field, the
corresponding IP address is displayed on the Response
page.
PING: no route to host
A valid IP address or name was entered but the routing
table does not indicate how to reach the network that the
IP address belongs to.
