Other Telnet Related Commands
5-3
list telnet clients
Displays a list of Telnet clients you configured using the
add telnet client
command. When access is globally enabled with the
enable telnet client_access
command, Telnet clients on the list can access the OfficeConnect Gateway. By
specifying a netmask, you can add network and subnetwork addresses. If no
netmask is specified, the host netmask value is assumed. An IP address of 0.0.0.0
allows universal entry to the OfficeConnect Gateway by Telnet users. See the
delete telnet client
command for more information. Also, issue the
list telnet
client
command for a list of configured users. The default is
Disabled
.
enable telnet
The enable telnet command lets you enable the following Telnet parameters:
client_access
disconnect_message
escape
terminal_download_mode
trying_message
These Telnet parameters are described in the following table:
Also see the
disable telnet
and
show time
commands.
Telnet CLIENT ADDRESSES
IP Address
Netmask
148.132.112.23
255.255.255.0
148.132.112.45
255.255.255.2
55
Parameter
Description
client_access
Allows users to Telnet into OfficeConnect Gateway based on the
Telnet client access list. This command is used in conjunction with
the
add telnet client
command. See the
list telnet client
command for settings. The default is
Disabled
.
disconnect_message
When enabled, it sends connection closed by foreign host and
similar messages when the connection is closed. The default is
enabled
.
escape
All Telnet clients are permitted to use the escape character during
a session. By default the escape character is
Ctrl]
(right bracket). A
user can change that value using
set_escape
in the Telnet
program.
terminal_
download_mode
Turns off local and remote echo for Telnet on a TCP port other
than 23 for an OfficeConnect Gateway Telnet client. When
enabled, this function forces Telnet clients to negotiate Telnet
ECHO DISABLE for both local and remote sides of the connection.
The default is
Disabled
.
trying_message
Turns on the trying status message for clients attempting to Telnet
out of the OfficeConnect Gateway. When escape is enabled,
Telnet clients who issue the escape character during their session
will get a local Telnet command line. This function is not supported
for login users.
Содержание OfficeConnect 3C100XF
