3Com OfficeConnect 3C100XF Скачать руководство пользователя страница 140

Страница: 140 / 260

15-4

HAPTER

15: M

ULTICASTING

AND

IGMP C

OMMANDS

Show Command

show ip igmp

[eth:1 |

slot:

/port:

]

Displays IP multicast settings for the specified interface.The following information
is displayed:

IGMP Interface

- Network interface of the OfficeConnect Gateway.

Eth:1

slot:

/port:

Query Interval

- Period, in seconds, IGMP Host-Query messages are sent on

this interface. The default is

125 seconds

Max Response

- Maximum time a host has to respond to query requests on

this interface. The default is

10 seconds

Version

- The version of IGMP running on this interface. The default is

Version

Querier

- Address of the IGMP Querier on the IP subnet to which this interface

is attached.

Joins

- Number of times a group membership has been added on this interface

- the number of times an entry for this interface has been added to the IGMP
Cache Table. It indicates the amount of IGMP activity over time.

Robustness

- Setting for expected packet loss on a subnet. The default is

Groups

- Current sum of multicast groups active on this interface.

Routing

- If enabled, indicates that OfficeConnect Gateway will try to become

a querier on this interface. If disabled, indicates OfficeConnect Gateway will act
as an IGMP host and only report multicast groups it joins. The default is

Disabled

Multicast Forwarding

- Indicates if multicast packets will be received and

transmitted on this interface. The default is

Disabled

Multicast Proxy

- If enabled, indicates any multicast groups joined or learned

on this interface will also be joined on the interface configured as the multicast
proxy interface. The default is disabled

IGMP Short Packets

- Sum of IGMP short packets received on the specified

interface.

IGMP Bad Checksum

- Sum of IGMP packets received with bad checksum on

the specified interface.

Queries Received

- Sum of IGMP queries received on the specified interface.

Reports Received

- Sum of IGMP reports received on the specified interface.

Reports For Known Groups Received

- Sum of IGMP reports for known

groups received on the specified interface.

Wrong Version Reports Received

- Sum of IGMP reports received with the

wrong IGMP version number on the specified interface.

eth:1

224.0.0.2

LEARNED/PROXY

00:00:0

00:00:00:0

slot:3/por

t:1

224.0.0.4

LEARNED/SELF/PROXY

00:00:0

2:2:2:2

Содержание OfficeConnect 3C100XF





































































































































































































































































Результаты поиска

Содержание OfficeConnect 3C100XF

Отзывы:

Похожие инструкции для OfficeConnect 3C100XF

Бренды по названию

Популярные бренды

3Com OfficeConnect 3C100XF, Руководство пользователя CLI

Результаты поиска

Содержание OfficeConnect 3C100XF

Отзывы:

Похожие инструкции для OfficeConnect 3C100XF

Бренды по названию

Популярные бренды