![background image](http://html1.mh-extra.com/html/3com/officeconnect-3c100xf/officeconnect-3c100xf_cli-users-manual_440829098.webp)
12-10
C
HAPTER
12: IP R
OUTING
C
OMMANDS
disable ip
address_pool_filtering
Disables packet filtering on all IP address pools (drops packets for IP addresses
within IP pools
not in use).
disable ip
address_pool_round_robi
n
Turns off round robin allocation of IP addresses from IP address pools configured
with the
add ip pool
command. The default is
enabled
.
disable ip forwarding
Causes the system to stop forwarding any packets over IP networks, but the
OfficeConnect Gateway will still operate as a client. Under most circumstances,
you would never disable forwarding. You may want to disable IP forwarding if you
are using the system only as a terminal server since users who TELNET to the
system can still connect to remote hosts.
disable ip
multicast_heartbeat
Disables multicast monitoring for a specified multicast group or interface.
disable ip network
<network_name>
Disables the specified IP network. Make sure there is no activity on this network
before disabling it.
disable ip rip
Disables the RIP routing algorithm on all IP networks. Use
show ip routing
to see
the current status of IP routing. This saves system space by preventing a large RIP
database, which is useful for networks connecting over the WAN interface.
disable ip
source_address_filter
Disables filtering of packets that bear a source IP address other than that assigned
by the OfficeConnect Gateway during negotiations. This should not be enabled
for LAN-to-LAN routing. This feature is disabled by default.
disable ip
static_remote_routes
Disables all statically defined remote routes on all IP networks,
add ip route
command. You can list the current IP routes using the
list ip routes
command.
List Commands
Parameter
Description
directed_bcast_forwarding
If there is a directed broadcast packet coming for the
OfficeConnect Gateway's directly connected network, the
OfficeConnect Gateway will forward that packet to the
interface depending on this configuration. Directed
broadcast will be forwarded only if the Destination IP
address of the packet matches with the broadcast route
installed for the interface. Default is
disabled
.
respond_to_directed_bcast
Disables the OfficeConnect Gateway from responding to the
ICMP requests, or generating ICMP error messages for
packets coming to a directed broadcast address of its
networks.
send_host_unreach_for_pool
When
disabled
, if the address is a part of the configured IP
Address Pool, the OfficeConnect Gateway does not send the
ICMP host an unreachable message (irrespective of any
routing information).
Содержание OfficeConnect 3C100XF
