Address Translation
16-7
Private addresses refer to addresses on the LAN
Public addresses refer to addresses on the WAN
<interface name> refers to the WAN interface (Example:
atmaal:1/PVC-67-0-35)
Static NAT
To configure Static NAT from the CLI for a PPPoE User, perform the following
steps:
1
Enter the following CLI commands.
OCG-Adsl>>add profile
<pppoe>
network_service pppoeC_ATM_RFC1483
OCG-Adsl>>set profile
<pppoe>
send_password
<root>
OCG-Adsl>>set profile
<pppoe>
bridging_disable
2
Enter one of the following CLI commands next:
If using dynamic IP addressing (the most common situation), enter the
following CLI command to make the OfficeConnect Gateway automatically
negotiate for an IP address:
OCG-Adsl>>set profile
<pppoe>
protocol ip
address_selection negotiate
If you know the specific local and remote IP addresses, enter the following CLI
command where
x.x.x.x
is the local IP address and
y.y.y.y
is the remote IP
address.
OCG-Adsl>>set profile
<pppoe>
protocol ip
local_ip_address
<x.x.x.x>
remote_ip_address
<y.y.y.y>
OCG-Adsl>>)set profile
<pppoe>
protocol ip default_route_option
enable routing both routing_protocols ripv2
OCG-Adsl>>) add atmaal5 pvc
<pvc34>
vpi
<0>
vci
<34>
OCG-Adsl>> add datalink ppp interface
<atmaal:1/pvc34>
profile
<pppoe>
OCG-Adsl>> set profile
<pppoe>
nat_option nat
OCG-Adsl>> add nat static
<policy name>
interface <
interface name
---atmaal:1/pvc34>
private_address
<ip address range>
public_address
<ip address range>
Both the public and private ranges must have the same number of IP Addresses.
Dynamic NAT
To configure Dynamic NAT from the CLI for a PPPoE User, perform the following
steps:
1
Enter the following CLI commands:
OCG-Adsl>> add nat dynamic
<policy name>
interface <
interface name >
private_address
<ip address range>
public_address
<ip address range>
The private range may be larger than the public range of IP Addresses.
Содержание OfficeConnect 3C100XF
