30
3Com Router 5000/6000 Family
Command Reference
destination-ip
Use the
destination-ip
command to configure the destination IP address in the test.
HWPing Test Group view
destination-port
Use the
destination-port
command to configure the destination port in the test.
HWPing Test Group view
detect
Use the
detect
command to specify ASPF policy for application layer protocols.
ASPF Policy view
detect
Use the
detect
command to enable data carrier detection as well as level detection on a serial interface.
Asynchronous Serial Interface view
Synchronous Serial Interface view,
detect-ais (CE1/PRI Interface)
Use the
detect-ais
command to enable alarm indication signal (AIS) detect on the CE1/PRI interface.
CE1/PRI Interface view
detect group
Use the
detect-group
command to create a detect group and enter its view.
System view
detect list
Use the
detect-list
command to add an IP address to the detect group and assign the address a detecting
sequence number.
Detect Group view
dh
Use the
dh
command to select the Diffie-Hellman group for an IKE proposal.
IKE Proposal view
dhcp accounting domain (Interface view)
Use the
dhcp server accounting domain
command to enable DHCP accounting for addresses from the
interface address pool and configure a domain for DHCP accounting.
Interface view
dhcp enable
Use the
dhcp enable
command to enable DHCP.
System view
dhcp relay information
Use the
dhcp relay information enable
command to enable the DHCP relay to support option 82
globally.
System view
dhcp relay information strategy
Use the
dhcp relay information strategy
command to configure a strategy for handling packets with
option 82 on the DHCP relay.
System view
dhcp relay release
Use the
dhcp relay release
command to send an IP address releasing request to a DHCP server via the
DHCP relay.
Interface view
System view
dchp select (Interface view)
Use the
dhcp select
command in Interface view to select a method for disposing the DHCP packets
destined to the local device.
Interface view
dchp select (System view)
Use the
dhcp select
command in System view to select a method for multiple interfaces in a specified
range to dispose the DHCP packets destined to the local device.
System view
dhcp server accounting domain interface (System view)
Use the
dhcp server accounting domain interface
command to enable DHCP accounting for addresses
from the address pools of the specified interfaces and configure a domain for DHCP accounting.
System view
Содержание 5000/6000
Страница 162: ...162 3Com Router 5000 6000 Family Command Reference...
