3Com 5000/6000, Краткое руководство пользователя

Страница: 135 / 162

3Com Router 5000/6000 Family 135
Command Reference
sdlc window
Use the
sdlc window
command to configure the length of the SDLC local response window.
Synchronous Serial Interface view
sdlc xid
Use the
sdlc xid
command to configure the XID of the SDLC.
Synchronous Serial Interface view
secondary accounting
Use the
secondary accounting
command to configure the IP address and port number for the secondary
RADIUS accounting server.
RADIUS view
secondary accounting
Use the
secondary accounting
command to configure a secondary TACACS accounting server.
view
secondary authentication
Use the
secondary authentication
command to configure the IP address and port number of the
secondary RADIUS authentication/authorization/accounting server.
RADIUS view
secondary authentication
Use the
secondary authentication
command to configure a secondary TACACS authentication server.
view
secondary authorization
Use the
secondary authorization
command to configure a secondary TACACS authorization server.
view
security acl
Use the
security acl
command to set an access control list to be used by the ipsec policy and specify the
data stream protection mode.
IPSec Policy view
IPSec Policy Template view
security-policy-server
Use the
security-policy-server
command to specify the IP address of a security policy server.
RADIUS Scheme view
seizure-ack
Use the
seizure-ack
command to enable or disable the terminating point to send seizure
acknowledgement signal.
R2 CAS view
select-mode
Use the
select-mode
command to configure the E1 trunk selection mode.
R2 CAS view
select-rule search-stop
Use the
select-rule search-stop
command to configure the maximum number of voice entities found.
Voice Dial Program view
select-rule type-first
Use the
select-rule type-first
command to configure the type-first select rules for voice entities.
Voice Dial Program view
select-rule rule-order
Use the
select-rule rule-order
command to configure the select rule of voice entities.
Voice Dial Program view
select-stop
Use the
select-stop
command to disable the search for voice entities.
Voice Entity view
send
Use the
send
command to transfer messages between user interfaces.
Use the
send all
command to send messages to all user interfaces.
Use the
send
number
command to send messages to the user interface specified by its absolute index.
Use the
send
type-name number
command to send messages to the user interface specified by its
interface type and relative index.
User view