3Com 5000/6000, Краткое руководство пользователя

Страница: 16 / 162

16 3Com Router 5000/6000 Family
Command Reference
code nrzi
Use the
code nrzi
command to set the digital signal coding format to None-Return-to-Zero-Inverse (NRZI)
for a synchronous serial interface.
Synchronous Serial Interface view
code nrzi
Use the
code nrzi
command to configure the NRZI encoding of the synchronous serial port.
Synchronous Serial Interface System view
command-alias enable
Use the
command-alias enable
command to enable the command alias function.
System view
command-alias mapping
Use the
command-alias mapping
command to map an alias to a keyword.
System view
command-privilege
Use the
command-privilege level
command to assign a command level to the commands in a specified
view.
System view
common-name
Use the
common-name
command to specify the common name of an entity, take User name for example.
PKI Entity view
compare-different-as-med
Use the
compare-different-as-med
command to enable comparison of MED values of routes from
neighbors residing in different ASs when determining the best route.
BGP Unicast view
BGP Multicast view
VPNv4 view
compression
Use the
compression
command to configure the voice coding method according to priority level.
Voice Entity view
confederation id
Use the
confederation id
command to configure confederation identifier.
BGP view
confederation nonstandard
Use the
confederation nonstandard
command, the router can be compatible with the AS confederation
not adopting RFC1965.
BGP view
confederation peer-as
Use the
confederation peer-as
command to specify the sub-ASs constituting a confederation.
BGP view
congestion-threshold
Use the
congestion-threshold
command to enable congestion management function of frame relay virtual
circuit.
Frame Relay Class view
connection
Use the
connection
command to create a CE connection.
MPLS L2VPN CE view
connection-limit default
Use the
connection-limit default
command to configure the action when the limit policy is not available.
System view
connection-limit default amount
Use the
connection-limit default amount
command to set default threshold for connection limit.
System view
connection-limit enable
Use the
connection-limit enable
command to enable the connection limit function.
System view
connection-limit policy
Use the
connection-limit policy
command to create connection limit policy and enter its view.
System view