3Com 5000/6000, Краткое руководство пользователя

Страница: 119 / 162

3Com Router 5000/6000 Family 119
Command Reference
queue wfq
Use the
queue wfq
command to configure the default-class to use WFQ.
Traffic Behavior view
quit
Use the
quit
command to return from current view to lower level view, or exit the system if current view is
user view.
Any view
quit
Use the
quit
command to disconnect from the remote FTP server and exit to user view.
FTP Client view
quit
Use the
quit
command to terminate the connection to the remote SFTP server and exit to system view as
you would with the
bye
and
exit
commands.
SFTP Client view
quit
Use the
quit
command to terminate the connection to the remote SSH server.
User view
qos apply policy
Use the
qos apply policy
command to apply a service policy to the interface.
Interface view
qos car
Use the
qos car
command to implement TP policy on an interface.
Interface view
qos carl
Use the
qos carl
command to establish or modify a CARL.
System view
qos cq
Use the
qos cq cql
command to apply the customized queue to an interface.
Interface view
qos cql default-queue
Use the
qos cql default-queue
command to assign a default queue for those packets that do not match
any rule in the CQL.
System view
qos cql inbound-interface
Use the
qos cql inbound-interface
command to establish classification rules based on interfaces.
System view
qos cql protocol
Use the
qos cql protocol
command to establish classification rules based on the protocol type.
System view
qos cql protocol mpls exp
Use the
qos cql protocol mpls exp
command to configure classification rule based on the MPLS
protocol.
System view
qos cql queue
Use the
qos cql queue
command to configure the length of a queue, namely, the number of packets a
queue can hold.
System view
qos cql queue serving
Use the
qos cql queue serving
command to set the byte-count of the packets sent from a given queue in
each poll.
System view
qos fifo queue-length
Use the
qos fifo queue-length
command to set the length limit of FIFO queue.
Interface view
qos gts
Use the
qos gts
command to set shaping parameters for all or a specified type of traffic and perform traffic
shaping.
Interface view