3Com 5000/6000, Краткое руководство пользователя

Страница: 104 / 162

104 3Com Router 5000/6000 Family
Command Reference
network-entity
Use the
network-entity
command to configure the name of Network Entity Title (NET) of the IS-IS routing
process.
IS-IS view
normal-connect slow-h245
Use the
normal-connect slow-h245
command to configure disabling the calling end from actively initiating
an H245 connection request to the called end before the called end is hooked off in voice entity view.
Use the
normal-connect slow-h245
command to disable the calling end from actively initiating an H245
connection request to the called end before the called end is hooked off in voice entity view.
VoIP Voice Entity view
nslookup type
Use the
nslookup type
command to resolve the specified IP address or domain name to a domain name
or IP address.
Any view
nssa
Use the
nssa
command to configure an area as NSSA area.
OSPF Area view
ntp-service access
Use the
ntp-service access
command to control access to the NTP service on the local device.
System view
ntp-service authentication enable
Use the
ntp-service authentication enable
command to enable NTP service ID authentication.
System view
ntp-service authentication-keyid
Use the
ntp-service authentication-keyid
command to set an NTP authentication key.
System view
ntp-service broadcast-client
Use the
ntp-service broadcast-client
command to configure NTP broadcast client mode.
Interface view
ntp-service broadcast-server
Use the
ntp-service broadcast-server
command to configure NTP broadcast server mode.
Interface view
ntp-service max-dynamic-sessions
Use the
ntp-service max-dynamic-sessions
command to set the number of sessions allowed by the local
device.
System view
ntp-service multicast-client
Use the
ntp-service multicast-client
command to configure NTP multicast client mode.
Interface view
ntp-service multicast-server
Use the
ntp-service multicast-server
command to configure NTP multicast server mode.
Interface view
ntp-service refclock-master
Use the
ntp-service refclock-master
command to set the local clock as the NTP master clock to provide
synchronization source.
System view
ntp-service reliable authentication-keyid
Use the
ntp-service reliable authentication-keyid
command to specify a reliable key.
System view
ntp-service source-interface
Use the
ntp-service source-interface
command to specify an interface for the local end to transmit NTP
messages.
System view
ntp-service unicast-peer
Use the
ntp-service unicast-peer
command to configure NTP peer mode.
System view
ntp-service unicast-server
Use the
ntp-service unicast-server
command to configure NTP server mode.
System view