3Com 5000/6000, Краткое руководство пользователя

Страница: 80 / 162

80 3Com Router 5000/6000 Family
Command Reference
igmp timer other-querier-present
Use the
igmp timer other-querier-present
command to configure the overtime value of presence of
IGMP querier.
Interface view
igmp timer query
Use the
igmp timer query
command to configure the interval at which a router interface sends IGMP query
messages.
Interface view
igmp version
Use the
igmp version
command to specify the version of IGMP that a router uses.
Interface view
ignore-lsp-checksum-error
Use the
ignore-lsp-checksum-error
command to configure the IS-IS to ignore the checksum error of
LSP.
IS-IS view
ike dpd
Use the
ike dpd
command to create a DPD structure and enter its view.
System view
ike local-name
Use the
ike local-name
command to set the name of the local GW.
System view
ike next-payload check disabled
Use the
ike next-payload check disabled
command to disable the router to check the next-payload field
in the last payload of the IKE negotiation packet during IPSec negotiation for compatibility with other
vendors.
System view
ike peer (IPSec Policy view or IPSec Policy Template view)
Use the
ike peer
command to quote an IKE peer in an IPSec policy or IPSec policy template.
IPSec Policy view
IPSec Policy Template view
ike peer (System view)
Use the
ike peer
command to configure an IKE peer and access IKE-peer view.
System view
ike proposal
Use the
ike proposal
command to define an IKE proposal.
System view
ike sa keepalive-timer interval
Use the
ike sa keepalive-timer interval
command to configure the interval for sending Keepalive
packet to the remote end through ISAKMP SA.
System view
ike sa keepalive-timer timeout
Use the
ike sa keepalive-timer timeout
command to configure a timeout for ISAKMP SA to wait for the
Keepalive packet.
System view
ike sa nat-keepalive-timer interval
Use the
ike sa nat-keepalive-timer interval
command to configure the NAT keepalive interval for IKE
peers.
System view
ima-clock
Use the
ima-clock
command to configure the clock mode of the IMA group.
IMA Group Interface view
ima ima-group
Use the
ima ima-group
command to add the ATM E1/T1 interface to the specified IMA group. If the
specified IMA group does not exist, it is created first.
ATM E1/T1 Interface view
ima-test
Use the
ima-test
command to set a test pattern for testing the connectivity of the specified link to the rest
of the IMA group.
IMA Group Interface view