3Com 5000/6000, Краткое руководство пользователя

Страница: 78 / 162

78 3Com Router 5000/6000 Family
Command Reference
if-match acl
Use the
if-match acl
command to set the match condition for IP address.
Route-Policy view
if-match acl
Use the
if-match acl
command to configure the IP address range to match the route-policy.
Routing Policy view
if-match any
Use the
if-match any
command to define the rule matching all packets.
Class view
if-match as-path
Use the
if-match as-path
command to filter BGP routing information.
Routing Policy view
if-match atmclp
Use the
if-match atmclp
command to create a cell loss priority (CLP) bit match rule defining that ATM cells
with CLP bit set to 1 are matched.
Use the
if-match not atmclp
command to create a CLP bit match rule defining that ATM cells with CLP
bit set to 0 are matched.
Class view
if-match classifier
Use the
if-match classifier
command to define class-map match rule.
Class view
if-match community
Use the
if-match community
command to configure the community list number to be matched in
route-policy.
Routing Policy view
if-match cost
Use the
if-match cost
command to configure one of the matching rules of route-policy to match the cost
of the routing information.
Routing Policy view
if-match {destination-mac | source-mac}
Use the
if-match
{ destination-mac | source-mac } command to define match rule of destination or source
MAC address.
Class view
if-match dot1p-cos
Use the
if-match dot1p-cos
command to define a COS field match rule for VLAN packets.
Class view
if-match dscp
Use the
if-match dscp
command to define an IP DSCP match rule.
Class view
if-match fr-de
Use the
if-match fr-de
command to define an FR DE matching rule.
Class view
if-match inbound-interface
Use the
if-match inbound-interface
command to define ingress interface match rule of a class.
Class view
if-match interface
Use the
if-match interface
command to match the route whose next hop is designated interface.
Routing Policy view
if-match ip next-hop
Use the
if-match ip next-hop
command to configure one of the match rules of route-policy on the next
hop address of the routing information.
Routing Policy view
if-match ip-precedence
Use the
if-match ip-precedence
command to define IP precedence match rule.
Class view
if-match ip-prefix
Use the
if-match ip-prefix
command to configure one of the match rules of route-policy on the IP
address range of the routing information.
Routing Policy view