3Com 3036, Руководство по настройке

Страница: 730 / 762

726 C
HAPTER
51: C
ONFIGURING
DCC
■
Secondary rule: The best match is the one that is found first.
Confirm which dialer call-in at server end is associated with the incoming call
■
In circular DCC, upon receiving an incoming call, the server searches for the
dialer call-in matching the incoming number in the
dialer call-in
commands configured on the physical interface or the dialer interface to which
the physical interfaces belongs.
■
In resource-shared DCC, upon receiving an incoming call, the server searches
for the
dialer call-in matching the incoming number in the
dialer call-in
commands configured for the dialer interfaces on it.
Configuring ISDN caller identification callback in the circular DCC
implementation
To c
onfigure ISDN caller identification callback client in the circular DCC
implementation, p
erform the following configuration in dial interface (physical or
dialer interface) view.
Table 761 Implement ISDN Caller Identification Callback (Client Configuration) in Circular
DCC
To configure the ISDN caller identification callback server in the circular DCC
implementation perform the following configuration in dial interface (physical or
dialer interface) view.
Table 762
I
mplement ISDN Caller Identification Callback (Server Configuration) in Circular
DCC
By default, callback according to ISDN caller identification is not configured.
The
dialer route
command configured on the dial interface (physical or dialer)
at the server should be exactly the same dialer route in the dial-in dialer number.
Configuring ISDN caller identification callback in the resource-shared DCC
implementation
To c
onfigure ISDN caller identification callback client in the resource-shared DCC
implementation,
perform the following configuration in dialer interface view.
Operation Command
Configure the destination addresses and
dial number(s) for calling one (or more)
remote ends
dialer route protocol
next-hop-address dial-number
Operation Command
Configure the local end to implement
ISDN callback according to the ISDN caller
identification
dialer call-in remote-number [
callback ]
Disable the local end to implement ISDN
callback according to the ISDN caller
identification
undo dialer call-in remote-number [
callback ]
Configure the destination address(es) and
dial number(s) for calling one (or more)
remote ends
dialer route protocol
next-hop-address dial-number