Predator ULTRA Installation Manual V2.1.25.3
Page 40
© 360 Vision Technology Ltd.
8.2.9 Recording
Only available on Edge Recording Predator
The role of the recording function is to store video streams as files on a storage device built into the camera.
The recording function can auto-detect the necessary parameters from each configured stream, such as
video compression, resolution, frame rate and bitrate. The size of the video created will depend on the video
compression and bitrate used.
Different options can be used to start a recording per stream, these are manual, continuous, external alarm,
network loss, attack detect and schedule. Each recording can be configured with different options including
recording duration.
The recorded file name will be displayed as YYYYMMDDhhmmss-x-name.avi
(x indicates the recording trigger d is manual demand, a is attack detect, s is schedule).
•
Camera - Cannot be edited, shows label/name given to the camera.
(See Video - Camera - page 27).
•
Stream 1, 2 or snapshot - Choose option to configure.
•
Name - Type in name of the file name to be used.
•
Split files - Set size of recording by file size or time period.
•
Thumbnail - If enabled before the recording, thumbnails can then be used as a filter in the multimedia
page
(See Recording browser - page 26).
•
Start/Stop - Demand a manual recording, use the start and stop to set.
• Continuous - Enable continuous recording.
•
External Alarm - Trigger recording from an external string.
•
Network Loss - Trigger recording from a network connection loss to the camera.
•
At Preset - Start recording when the camera gets to a specific preset, tour or mimic.
•
Attack Detect - Start recording if the camera is attacked
•
Schedule - Record as per recording schedule.
•
Schedule Edit - Setup a recording schedule
(See Recording browser - page 26).
•
Lifetime - Recording schedule will stop after this period.
