Predator ULTRA Installation Manual V2.1.25.3
Page 39
© 360 Vision Technology Ltd.
•
Disable Forced Settings - Switch off forced settings, camera to use settings as per light level.
• Force Mono Settings - Force camera into mono, no lamps, ambient focus range.
• Force HLC On - Switch on HLC option.
•
Force HLC Off - Switch off HLC option.
• Iris Open - Opens the camera iris.
• Iris Close - Closes the camera iris.
• Iris Auto - Switches on auto iris.
• Iris Manual - Sets camera to manual iris mode.
• Power Low - Sets the motors to use low power.
• Power On - Sets the motors to use full power.
Dark relates to when the camera is in dark mode, see section Camera - Night Changeover - page 32.
Force ONVIF Version Configuration
• Reported Version - Can be used to change the ONVIF version reported by the camera to the VMS,
options are:- Default - ONVIF 2.40, V2.02, V2.20 & V2.40. OK setting and then re-boot camera from
web page to apply.
• Preset Token Format - Default (Used on certain VMS servers. Uses mix of text and ‘P’ zero-pad
number as preset tokens). Number only (Used on certain VMS servers. Uses numbers as preset
tokens). ‘P’ zero-pad number (Used on certain VMS servers. Uses P001 to P360 as preset tokens).
• Authorisation Elevation - Used on Vicon VMS, allows the anonymous user to set as admin, viewer or
operator.
• Pan/Tilt position Range -
Used on VMS systems that use specific pan and tilt operation, used to set
the angular position to suit the VMS ONVIF position.
• Advertise Multicast - Option no longer required. When Multicast is enabled in Advanced Video page,
the stream will be advertised.
• Auxiliary Functions - Used to set how the VMS will see the ONVIF Auxiliary Token.
Configurable - Aux 1 - 8, configurable via web page
Standard - Standard ONVIF
Additional - Additional control commands using the ONVIF Standard
•
Pre-defined Presets
Advertise All - Show all pre-defined presets, when the VMS requests the presets from the camera.
Advertise Re-definable - Show re-definable pre-defined presets only e.g. Home
Omit - Do not show the pre-defined presets, when the VMS requests the presets from the camera.
• Iris Scale - Used on certain VMS systems, options are position or attenuation (dB).
OK
to apply the new settings into the Predator ULTRA.
Cancel
to abandon the changes to the interface settings.