Predator ULTRA Installation Manual V2.1.25.3
Page 47
© 360 Vision Technology Ltd.
Thermal IP Configuration
10 Locating the Thermal IP on your Network
Default IP Address
192.168.1.188
Subnet
255.255.255.0
Gateway
192.168.1.4
Using the DVR management software, ‘ONVIF Device Manager’ or 360 Vision Discovery Tool (which can be
found on the CD supplied or from 360 Vision Technology web site/technical support) to find the IP address of
the Thermal IP. Note the ports used by the Thermal IP are:-
Protocol
Port
ONVIF/HTTP
80 TCP
RTP Stream 1 (Unicast)
6970 TCP/UDP
RTCP Stream 1 (Unicast)
6971 TCP/UDP
RTP Stream 2 (Unicast)
6972 TCP/UDP
RTCP Stream 2 (Unicast)
6973 TCP/UDP
RTSP
554/8554 TCP
360 SDK
3600 TCP
360 Event
9001 TCP
11 Connecting to the Thermal IP
Type in the IP address of the Thermal IP into the address bar of Internet browser and install the plug-ins as
required. The web page of the camera will then appear.
Thermal IP Web Page Login screen
Enter the User Name (default is
admin
)
Enter the Password (default is
9999
)