2N Analog Vario, Руководство по установке

Страница: 35 / 77

Installation manual 2N® Analog Vario
35 / 77
2.
3.
4.
5.
6.
7.
Remove the name plates as shown in the figure using, e.g., a screw driver.
Remove the name plate inserts as shown in the figure.
Insert the labels printed on foil (see later).
Replace the name plate inserts.
Put the name plates back in the depression and click into position. The name plates keep
the matt foil steady.
Replace and screw on the metal cover.
•
Note
You can remove the name plates even without removing the metal cover however
damage, if any, incurred as result of this, is not covered by the warranty.
