2N Analog Vario, Руководство по установке

Страница: 69 / 77

Installation manual 2N® Analog Vario
69 / 77
•
•
•
•
•
•
•
•
•
•
Value of parameter
977
Language selection –
English version
Outgoing call
message
Note
0 Tone signal off To play this message,
parameter 975 must start
with digit 5.
Parameter 977 has a range
0–99. On customer's
request, additional
messages can be added;
e.g. other languages or
more alternative messages
in one and the same
language.
1 *) English Wait please.
2 German Warten Sie bitte.
3 Portuguese .............
4 Dutch .............
Arrival/Departure, Day/Night Modes
2N
®
Analog Vario can identify easily where to 'route' (switch) a call after a button is pressed. All
you have to do is call 2N
®
Analog Vario and enter the following:
I'm leaving: password
I'm back: password
All buttons can be switched all at once by a common Day/Night password or individually by
separate Departure/Arrival passwords .
How does switching work?
Every button has memories for 6 numbers (intended primarily for Automatic Multiple
Number Dialling).
If the Automatic Multiple Number Dialling mode is OFF , memory 1 is used for the Day
mode and memory 3 for the Night mode. This is a simple two-number switching.
If the Automatic Multiple Number Dialling mode is ON , memories 1, 2, 3, 4, 5, 6 are used
for the Day mode and memories 3, 4, 5, 6 are used for the Night mode in the above-
mentioned order. This accelerates the process; numbers that would not be answered are
skipped over.
If the Night mode is on and memories 3 to 6 are empty, memories 1 and 2 are used.
If the Night mode is on, memories 1 and 2 are omitted for all buttons and this cannot be
disabled individually using the Arrival function.
In the Day mode, the buttons assigned to persons who used the Departure function (are
on a leave) shall remain in the Night mode until the same persons use the Arrival function
(after the leave, e.g.).