2N Analog Vario, Руководство по установке

Страница: 56 / 77

Installation manual 2N® Analog Vario
56 / 77
Signals Overview
Signal Name Meaning
Confirmation Sent immediately after line seizure
for incoming calls (can be heard by
the calling party);
Signals switch activation (by DTMF) –
can be heard by the person "at the
other end" who activated the switch
Refusal Signals that a non-programmed
button has been pressed;
Signals that an incorrect password
has been entered on the keypad;
Can be heard from the loudspeaker
after line connection (first connection
signalling);
Signals an incoming call if
2N
®
Analog
Vario has not been programmed;
When a disabled function has been
entered from the keypad.
Storing Signals switch deactivation (if
activated by DTMF).
Hang-up Sent to notify that the call is
terminated (in all cases).
Long continuous tone Signals that the unit is going through
full initialisation or dialling memory
or password clearing;
Heard from the loudspeaker while the
switch is activated by keypad.
•
Caution
The above mentioned functions (except for calls to 2N
®
Analog Vario ) require
a tone-dialling telephone set.
