2N Analog Vario, Руководство по установке

Страница: 21 / 77

Installation manual 2N® Analog Vario
21 / 77
4.
5.
6.
7.
8.
In multiple-module assemblies connect the boxes, placing the basic module to the left and
the extending modules to the right. The interconnecting cable shall be connected later!
Install blank modules on the unused side holes as shown in Figure previous step.
If you are installing a roof module, put it on the wall now.
Fix 2N
®
Analog Vario on the wall with screws. Carry the supply cables (Ethernet, lock,
power cables) to the basic module box through one of the holes. Seal the screw hole
carefully with some cement or non-aggressive silicone to avoid water infiltration.
While installing a roof module, paste its top and side edges to the wall using silicone glue
to prevent water from flowing into the box along or around the cables.
•
Warning
Make sure that the mounting surface for the 2N
®
Analog Vario door
communicator is perfectly flat. Avoid mechanical overload upon the bottom
part of the cover. An incorrect installation on an uneven surface may lead to
cover deformation and thus product malfunctions.
