background image

Installation manual 2N® Analog Vario

70

 /  

77

1.
2.

3.

1.
2.




Example 1 – administration building, automatic dialling is off:

Button  01:  labelled  Mr.  Smith,  memory  1  =  Mr.  Smith's  line,  memory  3 

– 

secretary's  line, 

password for button 01 is 777.

Mr. Smith is leaving for holiday. He calls

 

2N

® 

Analog Vario

 and enters: 

777 

1

A visitor comes, presses Mr. Smith's button –

 

2N

® 

Analog Vario

 calls the secretary.

Mr. Smith comes back. He calls

 

2N

® 

Analog Vario

 and enters: 

777

0

.

Example 2 – family house, Silent Automatic Multiple Number Dialling:

Button  01:  labelled  The  Johnsons,  memory  1  =  living  room,  2  =  workshop,  3  =  Mr.  Johnson's 
mobile telephone, 4 = Mrs. Johnson's mobile telephone. Arrival/Departure password for button 
01 is 333.

The family is leaving for holiday. They call 

 

2N

® 

Analog Vario

 and enter: 

333

A visitor presses the Johnson's' button – 

 

2N

® 

Analog Vario

 calls Mr. Johnson's mobile 

phone and, if unsuccessful, Mrs. Johnson's mobile phone.

3.5 Maintenance

Cleaning

If used 

frequently, 

2N

® 

Analog Vario

, especially the keypad, gets dirty. To clean it, use a piece of 

soft  cloth  moistened  with  clean  water.  We  recommend  you  to  obey  the  following  principles 
while cleaning:

Never use aggressive detergents (such as abrasives or strong disinfectants);
Clean the device in dry weather in order to make waste water evaporate quickly.

Label Replacement, Programming Status Changes

For necessary steps refer to the preceding subsections. Keep the following for later changes:

this manual;
the completed programming form (including a copy);
unused transparent foil strips for button labels.

Caution

Always use the product for the purpose it was designed and manufactured for, in 
compliance herewith.
The manufacturer reserves the right to modify the product in order to improve its 
qualities.

2N

® 

Analog Vario

 contains no environmentally harmful components. When the 

product's service life is exhausted and you would like to dispose of it please do so 
in accordance with applicable legal regulations.

Содержание Analog Vario














































































Отзывы: