ZyXEL Communications ZyXEL ZyWALL USG-1000, User Manual

Page: 719 / 986

Chapter 46 System
ZyWALL USG 2000 User’s Guide
719
Admin/User
Service
Control Admin Service Control specifies from which zones an administrator can
use HTTP to manage the ZyWALL (using the Web Configurator). You can
also specify the IP addresses from which the administrators can manage
the ZyWALL.
User Service Control specifies from which zones a user can use HTTP to
log into the ZyWALL (to log into SSL VPN for example). You can also
specify the IP addresses from which the users can access the ZyWALL.
# This is the index number of the service control rule.
The entry with a hyphen (-) instead of a number is the ZyWALL’s (non-
configurable) default policy. The ZyWALL applies this to traffic that does
not match any other configured rule. It is not an editable rule. To apply
other behavior, configure a rule that traffic will match so the ZyWALL will
not have to use the default policy.
Zone This is the zone on the ZyWALL the user is allowed or denied to access.
Address This is the object name of the IP address(es) with which the computer is
allowed or denied to access.
Action This displays whether the computer with the IP address specified above
can access the ZyWALL zone(s) configured in the Zone field (Accept) or
not (Deny).
Add icon Click the Add icon in the heading row to open a screen where you can
add a new rule. Refer to
Table 232 on page 720 for information on the
fields.
Click the Edit icon to go to the screen where you can edit the rule.
Click the Add icon in an entry to add a rule below the current entry.
Click the Delete icon to remove an existing rule. A window display
asking you to confirm that you want to delete the rule. Note that
subsequent rules move up by one when you take this action.
Click the Move to N icon to display a field to type a number for where
you want to put that rule and press [ENTER] to move the rule to the
number that you typed.
Authentication
Client
Authentication
Method
Select a method the HTTPS or HTTP server uses to authenticate a client.
You must have configured the authentication methods in the Auth.
method screen.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.
Table 231 System > WWW > Service Control (continued)
LABEL DESCRIPTION