ZyXEL Communications ZyXEL ZyWALL USG-1000, User Manual

Page: 497 / 986

Chapter 31 IDP
ZyWALL USG 2000 User’s Guide
497
The following table describes the fields in this screen.
Table 147 Anti-X > IDP > Profile > Group View
LABEL DESCRIPTION
Name This is the name of the profile. You may use 1-31 alphanumeric
characters, underscores(
_
), or dashes (-), but the first character cannot
be a number. This value is case-sensitive. These are valid, unique profile
names:
MyProfile
mYProfile
Mymy12_3-4
These are invalid profile names:
1mYProfile
My Profile
MyProfile?
Whatalongprofilename123456789012
Switch to
query view Click this button to go to a screen where you can search for signatures by
criteria such as name, ID, severity, attack type, vulnerable attack
platforms, service category, log options or actions.
Service Click the + sign next to a service group to expand it. A service group is a
group of related IDP signatures.
Message This is the name of the signature.
SID This is the signature ID (identification) number that uniquely identifies a
ZyWALL signature.
Severity These are the severities as defined in the ZyWALL. The number in
brackets is the number you use if using commands.
Severe (5): These denote attacks that try to run arbitrary code or gain
system privileges.
High (4): These denote known serious vulnerabilities or attacks that are
probably not false alarms.
Medium (3): These denote medium threats, access control attacks or
attacks that could be false alarms.
Low (2): These denote mild threats or attacks that could be false alarms.
Very Low (1): These denote possible attacks caused by traffic such as
Ping, trace route, ICMP queries etc.
Policy
Type
This is the attack type as defined on the ZyWALL. See Table 148 on page
499 for a description of each type.
Activation Click the icon to enable or disable a signature or group of signatures.