ZyXEL Communications ZyXEL ZyWALL USG-1000, User Manual

Page: 653 / 986

Chapter 41 AAA Server
ZyWALL USG 2000 User’s Guide
653
41.2.1 Configuring Active Directory or LDAP Default Server
Settings
To configure the Active Directory or LDAP default server settings, click Object >
AAA Server > Active Directory (or LDAP) to display the screen as shown.
Figure 436 Object > AAA Server > Active Directory (or LDAP) > Default
The following table describes the labels in this screen.
Table 202 Object > AAA Server > Active Directory (or LDAP) > Default
LABEL DESCRIPTION
Host Enter the IP address (in dotted decimal notation) or the fully-qualified
domain name (up to 63 alphanumerical characters) of an AD or LDAP
server.
Port Specify the port number on the AD or LDAP server to which the ZyWALL
sends authentication requests. Enter a number between 1 and 65535.
The default is 389.
Bind DN Specify the bind DN for logging into the AD or LDAP server. Enter up to
127 alphanumerical characters.
For example,
cn=zywallAdmin
specifies
zywallAdmin
as the user
name.
Password If required, enter the password (up to 15 alphanumerical characters)
for the ZyWALL to bind (or log in) to the AD or LDAP server.
Base DN Specify the directory (up to 127 alphanumerical characters). For
example,
o=ZyXEL, c=US
.
CN Identifier Specify the unique common name that uniquely identifies a record in
the AD or LDAP directory. Enter up to 127 alphanumerical characters.
Search time
limit Specify the timeout period (between 1 and 300 seconds) before the
ZyWALL disconnects from the AD or LDAP server. In this case, user
authentication fails.
The search timeout occurs when either the user information is not in the
AD or LDAP server or the server is down.