ZyXEL Communications ZyXEL ZyWALL USG-1000 User Manual Download Page 868 | Manualshive

Page: 868 / 986

background image

Appendix A Log Descriptions

ZyWALL USG 2000 User’s Guide

868

Interface %s connect

failed: MS-CHAP

authentication

failed.

MS-CHAP authentication failed (the server must support MS-
CHAP and verify that the authentication failed, this does not
include cases where the server does not support MS-CHAP).
%s: interface name.

Interface %s connect

failed: CHAP

authentication

failed.

CHAP authentication failed (the server must support CHAP
and verify that the authentication failed, this does not include
cases where the server does not support CHAP). CHAP:
interface name.

Interface %s is

connected.

A PPP or AUX interface connected successfully. %s: interface
name.

Interface %s is

disconnected.

A PPP or AUX interface disconnected successfully. %s:
interface name.

Interface %s connect

failed: Peer not

responding.

The interface’s connection will be terminated because the
server did not send any LCP packets. %s: interface name.

Interface %s connect

failed: PAP

authentication

failed.

PAP authentication failed (the server must support PAP and
verify verify that the authentication failed, this does not
include cases where the server does not support PAP). %s:
PPP interface name.

Interface %s connect

failed: Connect

timeout.

A PPPOE connection timed out due to a lack of response from
the PPPOE server. %s: PPP interface name.

Interface %s create

failed because has no

member.

A bridge interface has no member. %s: bridge interface
name.

"Interface cellular

Application Error Code

%d\n.

The listed error code (%d) was generated due to an internal
cellular interface error.

"An error [%d]

occurred while

negotiating with the

device in %s. Please

try to remove then

insert the device.

The listed error code (%d) happened when the ZyWALL
attempted to negotiate with the cellular device installed in (or
connected to) the listed slot (%s). Remove and reinstall the
device.

"Unable to negotiate

with the device in %s.

Please try to remove

then insert the

device.

The ZyWALL could not negotiate with the cellular device
installed in (or connected to) the listed slot (%s). Remove
and reinstall the device.

"Unable to configure

the selected frequency

band to the device in

%s. Please try to

remove then insert the

device.

The ZyWALL failed to set the cellular device installed in (or
connected to) the listed slot (%s) to use the frequency band
you configured. The cellular device may not support the band
or you may need to try removing and reinstalling the device.

"PIN code is required

for inteface

cellular%d. Please

check the PIN code

setting.

The PIN code configured for the listed cellular interface (%d)
is incorrect or missing.

Table 289

Interface Logs (continued)

LOG MESSAGE

DESCRIPTION

«
...
866
867
868
869
870
...
»

Summary of Contents for ZyXEL ZyWALL USG-1000



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ZyXEL ZyWALL USG-1000

Brand: Keezel Pages: 27

PA-5200 Seriesp

Brand: PaloAlto Networks Pages: 60

Brand: Watchguard Pages: 2

Brand: H3C Pages: 44

Airwall-250 Series

Brand: TEMPERED Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands