ZyXEL Communications ZyXEL ZyWALL USG-1000, User Manual

Page: 849 / 986

Appendix A Log Descriptions
ZyWALL USG 2000 User’s Guide
849
Console baud has been
reset to %d.
An administrator changed the console port baud rate back to
the default (115200).
%d is default baud rate
DHCP Server on
Interface %s will not
work due to Device HA
status is Stand-By
If interface is stand-by mode for device HA, DHCP server
can't be run. Otherwise it has conflict with the interface in
master mode.
%s is interface name
DHCP Server on
Interface %s will be
reapplied due to
Device HA status is
Active
When an interface has become the HA master, the DHCP
server needs to start operating.
%s is interface name
DHCP's DNS option:%s
has changed.
DHCP pool's DNS option support from WAN interface. If this
interface is unlink/disconnect or link/connect, this log will be
shown.
%s is interface name. The DNS option of DHCP pool has
retrieved from it
Set timezone to %s.
An administrator changed the time zone.
%s is time zone value
Set timezone to
default.
An administrator changed the time zone back to the default
(0).
Enable daylight
saving.
An administrator turned on daylight saving.
Disable daylight
saving.
An administrator turned off daylight saving.
DNS access control
rules have been
reached the maximum
number.
An administrator tried to add more than the maximum
number of DNS access control rules (64).
DNS access control
rule %u of DNS has
been appended.
An administrator added a new rule.
%u is rule number
DNS access control
rule %u has been
inserted.
An administrator inserted a new rule.
%u is rule number
DNS access control
rule %u has been
appended
An administrator appended a new rule.
%u is rule number
DNS access control
rule %u has been
modified
An administrator modified the rule %u.
%u is rule number
DNS access control
rule %u has been
deleted.
An administrator removed the rule %u.
%u is rule number
Table 282 Built-in Services Logs (continued)
LOG MESSAGE DESCRIPTION