ZyXEL Communications ZyXEL ZyWALL USG-1000, User Manual

Page: 642 / 986

Chapter 39 Services
ZyWALL USG 2000 User’s Guide
642
39.3.1 The Service Group Add/Edit Screen
The Service Group Add/Edit screen allows you to create a new service group or
edit an existing one. To access this screen, go to the Service Group screen (see
Section 39.3 on page 640 ), and click either the Add icon or an Edit icon.
Figure 429 Object > Service > Service Group > Edit
The following table describes the labels in this screen.
Table 198 Object > Service > Service Group > Edit
LABEL DESCRIPTION
Name Enter the name of the service group. You may use 1-31 alphanumeric
characters, underscores(
_
), or dashes (-), but the first character cannot
be a number. This value is case-sensitive.
Description Enter a description of the service group, if any. You can use up to 60
printable ASCII characters.
Available This field displays the names of the service and service group objects
that can be added to the service group.
Select service and service group objects that you want to be members of
this group and click the right arrow to add them to the member list.
Member This field displays the names of the service and service group objects
that have been added to the service group. The order of members is not
important. To remove members, select them and click the left arrow.
OK Click OK to save your changes back to the ZyWALL.
Cancel Click Cancel to exit this screen without saving your changes.