ZyXEL Communications ZyXEL ZyWALL USG-1000, User Manual

Page: 463 / 986

Chapter 29 Application Patrol
ZyWALL USG 2000 User’s Guide
463
29.4.1 The Other Applications Add/Edit Screen
The Other Configuration Add/Edit screen allows you to create a new condition
or edit an existing one. To access this screen, go to the Other Protocol screen
(see
Section 29.4 on page 460 ), and click either the Add icon or an Edit icon.
Figure 337 AppPatrol > Other > Edit
The following table describes the labels in this screen.
Table 133 AppPatrol > Other > Edit
LABEL DESCRIPTION
Enable Select this check box to turn on this policy.
Port Use this field to specify a specific port number to which to apply this
policy. Type zero, if this policy applies for every port number.
Schedule Select a schedule that defines when the policy applies or select Create
Object to configure a new one (see
Chapter 40 on page 643 for details).
Otherwise, select any to make the policy always effective.
User Select a user name or user group to which to apply the policy. Select
Create Object to configure a new user account (see
Section 37.2.1 on
page 618 for details). Select any to apply the policy for every user.
From Select the source zone of the traffic to which this policy applies.
To Select the destination zone of the traffic to which this policy applies.
Access This field controls what the ZyWALL does with packets that match this
policy. Choices are:
forward - the ZyWALL routes the packets.
Drop - the ZyWALL does not route the packets and does not notify the
client of its decision.
Reject - the ZyWALL does not route the packets and notifies the client
of its decision.
Source Select a source address or address group for whom this policy applies.
Select Create Object to configure a new one. Select any if the policy is
effective for every source.