ZyXEL Communications ZyXEL ZyWALL USG-1000, User Manual

Page: 720 / 986

Chapter 46 System
ZyWALL USG 2000 User’s Guide
720
46.6.5 Service Control Rules
Click Add or Edit in the Service Control table in a WWW, SSH, Telnet, FTP or
SNMP screen to add a service control rule.
Figure 473 System > Service Control Rule > Edit
The following table describes the labels in this screen.
46.6.6 Customizing the WWW Login Page
Click System > WWW > Login Page to open the Login Page screen. Use this
screen to customize the Web Configurator login screen. You can also customize
the page that displays after an access user logs into the Web Configurator to
Table 232 System > Service Control Rule > Edit
LABEL DESCRIPTION
Address
Object Select ALL to allow or deny any computer to communicate with the
ZyWALL using this service.
Select a predefined address object to just allow or deny the computer
with the IP address that you specified to access the ZyWALL using this
service.
Zone Select ALL to allow or prevent any ZyWALL zones from being accessed
using this service.
Select a predefined ZyWALL zone on which a incoming service is allowed
or denied.
Action Select Accept to allow the user to access the ZyWALL from the specified
computers.
Select Deny to block the user’s access to the ZyWALL from the specified
computers.
OK Click OK to save your customized settings and exit this screen.
Cancel Click Cancel to exit this screen without saving