ZyXEL Communications ZyWALL USG Series Reference Manual Download Page 241

Page: 241 / 426

Chapter 35 Content Filtering

ZyWALL / USG (ZLD) CLI Reference Guide

241

35.6 Content Filter Filtering Profile Commands

The following table lists the commands that you can use to configure a content filtering profile. Use
the

configure terminal

command to enter the configuration mode to be able to use these

commands. See

Table 136 on page 238

for details about the values you can input with these

commands.

Table 138

content-filter Filtering Profile Commands Summary

COMMAND

DESCRIPTION

[no] content-filter profile

filtering_profile

Creates a content filtering profile. The

command

removes the profile.

[no] content-filter profile

filtering_profile

custom

Sets a content filtering profile to use a profile’s custom
settings (lists of trusted web sites and forbidden

web sites

and blocking of certain web features). The

command

has the profile not use the custom settings.

[no] content-filter profile

filtering_profile

custom

activex

Sets a content filtering profile to block ActiveX controls.
The

command sets the profile to allow ActiveX.

[no] content-filter profile

filtering_profile

custom

Sets a content filtering profile to block Cookies. The

command sets the profile to allow Cookies.

content-filter profile

filtering_profile

custom-list

forbid

Enters the sub-command for configuring the content
filtering profile’s list of forbidden hosts.

[no]

forbid_hosts

Adds a forbidden host to the content filtering profile’s list.
The

command removes it.

exit

Leaves the sub-command mode.

[no] content-filter profile

filtering_profile

custom

java

Sets a content filtering profile to block Java. The

command sets the profile to allow Java.

content-filter profile

filtering_profile

custom-list

keyword

Enters the sub-command for configuring the content
filtering profile’s list of forbidden keywords. This has the
content filtering profile block access to Web sites with URLs
that contain the specified keyword or IP address in the
URL.

[no]

keyword

Adds a forbidden keyword or IP address to the content
filtering profile’s list. The

command removes it.

exit

Leaves the sub-command mode.

[no] content-filter profile

filtering_profile

custom

proxy

Sets a content filtering profile to block access to web proxy
servers. The

command sets the profile to allow access

to proxy servers.

content-filter profile

filtering_profile

custom-list

trust

Enters the sub-command for configuring the content
filtering profile’s list of trusted hosts.

[no]

trust_hosts

Adds a trusted host to the content filtering profile’s list. The

command removes it.

exit

Leaves the sub-command mode.

[no] content-filter profile

filtering_profile

custom

trust-allow-features

Sets a content filtering profile to permit Java, ActiveX and
Cookies from sites on the trusted list. The

command

has the content filtering profile not permit Java, ActiveX
and Cookies from sites on the trusted list

[no] content-filter profile

filtering_profile

custom

trust-only

Sets a content filtering profile to only allow access to web
sites that are on the trusted list. The

command has the

profile allow access to web sites that are not on the trusted
list.

Summary of Contents for ZyWALL USG Series











































































































































































































































































































































































































































Search results

Summary of Contents for ZyWALL USG Series

Reviews:

Related manuals for ZyWALL USG Series

Brands by name

Popular brands

ZyXEL Communications ZyWALL USG Series, Reference Manual

Search results

Summary of Contents for ZyWALL USG Series

Reviews:

Related manuals for ZyWALL USG Series

Brands by name

Popular brands