ZyXEL Communications ZyWALL USG Series Reference Manual Download Page 276

Page: 276 / 426

ZyWALL / USG (ZLD) CLI Reference Guide

276

H A P T E R

4 0

Application Object

Check that you have the latest IDP and App Patrol signatures.

40.1 Application Object Commands Summary

The following table describes the values required for many application object commands. Other
values are discussed with the corresponding commands.

40.1.1 Application Object Commands

This table lists the application object commands.

Table 163

Input Values for Application Object Commands

LABEL

DESCRIPTION

<object>

Type the name of the object.

<description>

This is a description of the object

<sid>

This is the associated IDP and App Patrol signature ID number.

Table 164

application-object

Commands

COMMAND

DESCRIPTION

show application-object

<object>

Displays information on the named application object.

application-object <

object

Creates an object with the specified name. You may use 1-31
alphanumeric characters, underscores(

), or dashes (-), but the first

character cannot be a number. This value is case-sensitive. The

command disables it.

[no] description <

description

Write a description of the object.

[no] application <

sid

Write a valid signature ID for the object. The

command disables it.

no application-object <

object

Deletes the object with the specified name.

application-object rename <

object

> <

object

Renames the specified object with a new name.

Summary of Contents for ZyWALL USG Series











































































































































































































































































































































































































































Search results

Summary of Contents for ZyWALL USG Series

Reviews:

Related manuals for ZyWALL USG Series

Brands by name

Popular brands

ZyXEL Communications ZyWALL USG Series, Reference Manual

Search results

Summary of Contents for ZyWALL USG Series

Reviews:

Related manuals for ZyWALL USG Series

Brands by name

Popular brands