ZyXEL Communications ZyWALL USG Series Reference Manual Download Page 342

Page: 342 / 426

Chapter 53 File Manager

ZyWALL / USG (ZLD) CLI Reference Guide

342

• When the ZyWALL / USG reboots, if the

startup-config.conf

file passes the error check, the

ZyWALL / USG keeps a copy of the

startup-config.conf

file as the

lastgood.conf

configuration

file for you as a back up file. If you upload and apply a configuration file with an error, you can
apply

lastgood.conf

to return to a valid configuration.

53.2.4 Configuration File Flow at Restart

If there is not a

startup-config.conf

when you restart the ZyWALL / USG (whether through a

management interface or by physically turning the power off and back on), the ZyWALL / USG uses
the

system-default.conf

configuration file with the ZyWALL / USG’s default settings.

If there is a

startup-config.conf

, the ZyWALL / USG checks it for errors and applies it. If there are

no errors, the ZyWALL / USG uses it and copies it to the

lastgood.conf

configuration file. If there

is an error, the ZyWALL / USG generates a log and copies the

startup-config.conf

configuration

file to the

startup-config-bad.conf

configuration file and tries the existing

lastgood.conf

configuration file. If there isn’t a

lastgood.conf

configuration file or it also has an error, the

ZyWALL / USG applies the

system-default.conf

configuration file.

You can change the way the

startup-config.conf

file is applied. Include the

setenv-startup

stop-on-error off

command. The ZyWALL / USG ignores any errors in the

startup-

config.conf

file and applies all of the valid commands. The ZyWALL / USG still generates a log for

any errors.

53.3 File Manager Commands Input Values

The following table explains the values you can input with the file manager commands.

Table 210

File Manager Command Input Values

LABEL

DESCRIPTION

file_name

The name of a file. Use up to 25 characters (including a-zA-Z0-9;‘~!@#$%^&()_+[]{}’,.=-).

Summary of Contents for ZyWALL USG Series











































































































































































































































































































































































































































Search results

Summary of Contents for ZyWALL USG Series

Reviews:

Related manuals for ZyWALL USG Series

Brands by name

Popular brands

ZyXEL Communications ZyWALL USG Series, Reference Manual

Search results

Summary of Contents for ZyWALL USG Series

Reviews:

Related manuals for ZyWALL USG Series

Brands by name

Popular brands