ZyXEL Communications ZyWALL USG Series Reference Manual Download Page 293

Page: 293 / 426

Chapter 44 AAA Server

ZyWALL / USG (ZLD) CLI Reference Guide

293

44.2.3 radius-server Commands

The following table lists the

radius-server

commands you use to set the default RADIUS server.

44.2.4 radius-server Command Example

The following example sets the secret key and timeout period of the default RADIUS server
(172.23.10.100) to “87643210” and 80 seconds.

44.2.5 aaa group server ad Commands

The following table lists the

aaa group server ad

commands you use to configure a group of

AD servers.

Table 176

radius-server Commands

COMMAND

DESCRIPTION

show radius-server

Displays the default RADIUS server settings.

[no] radius-server host

radius_server

auth-port

auth_port

Sets the RADIUS server address and service port number. Enter the IP address
(in dotted decimal notation) or the domain name of a RADIUS server. The

command clears the settings.

[no] radius-server key

secret

Sets a password (up to 15 alphanumeric characters) as the key to be shared
between the RADIUS server and the ZyWALL / USG. The

command clears

this setting.

[no] radius-server timeout

time

Sets the search timeout period (in seconds). Enter a number between 1 and
300. The

command clears this setting.

Router# configure terminal

Router(config)# radius-server host 172.23.10.100 auth-port 1812

Router(config)# radius-server key 876543210

Router(config)# radius-server timeout 80

Router(config)# show radius-server

host : 172.23.10.100

authentication port: 1812

key : 876543210

timeout : 80

Router(config)#

Table 177

aaa group server ad Commands

COMMAND

DESCRIPTION

clear aaa group server ad [

group-name

]

Deletes all AD server groups or the specified AD server group.

Note: You can NOT delete a server group that is currently in use.

show aaa group server ad

group-name

Displays the specified AD server group settings.

[no] aaa group server ad

group-name

Sets a descriptive name for an AD server group. Use this command to enter
the sub-command mode.

The

command deletes the specified server group.

aaa group server ad rename

group-name

Changes the descriptive name for an AD server group.

aaa group server ad

group-name

Enter the sub-command mode to configure an AD server group.

[no] case-sensitive

Specify whether or not the server checks the username case. Set this to be
the same as the server’s behavior.

Summary of Contents for ZyWALL USG Series











































































































































































































































































































































































































































Search results

Summary of Contents for ZyWALL USG Series

Reviews:

Related manuals for ZyWALL USG Series

Brands by name

Popular brands

ZyXEL Communications ZyWALL USG Series, Reference Manual

Search results

Summary of Contents for ZyWALL USG Series

Reviews:

Related manuals for ZyWALL USG Series

Brands by name

Popular brands