ZyXEL Communications ZyWALL USG Series Reference Manual Download Page 271

Page: 271 / 426

Chapter 39 User/Group

ZyWALL / USG (ZLD) CLI Reference Guide

271

39.2.2 User Group Commands

This table lists the commands for groups.

39.2.3 User Setting Commands

This table lists the commands for user settings, except for forcing user authentication.

username

username

[no] logon-lease-time

<0..1440>

Sets the lease time for the specified user. Set it to zero to set
unlimited lease time. The

command sets the lease time to

five minutes (regardless of the current default setting for new
users).

username

username

[no] logon-re-auth-time

<0..1440>

Sets the reauthorization time for the specified user. Set it to
zero to set unlimited reauthorization time. The

command

sets the reauthorization time to thirty minutes (regardless of
the current default setting for new users).

Table 158

username/groupname Commands Summary: Users (continued)

COMMAND

DESCRIPTION

Table 159

username/groupname Commands Summary: Groups

COMMAND

DESCRIPTION

show groupname [

groupname

]

Displays information about the specified user group or about all user groups
set up in the ZyWALL / USG.

[no] groupname

groupname

Creates the specified user group if necessary and enters sub-command
mode. The

command deletes the specified user group.

[no] description

description

Sets the description for the specified user group. The

command clears

the description for the specified user group.

[no] groupname

groupname

Adds the specified user group (second

groupname

) to the specified user

group (first

groupname

[no] user

username

Adds the specified user to the specified user group.

groupname rename

groupname groupname

Renames the specified user group (first

groupname

) to the specified group-

name (second

groupname

Table 160

username/groupname Commands Summary: Settings

COMMAND

DESCRIPTION

show users default-setting {all | user-type

{admin|user|guest|limited-admin|ext-user|

ext-group-user}}

Displays the default lease and reauthentication times for the
specified type of user accounts.

users default-setting [no] logon-lease-time

<0..1440>

Sets the default lease time (in minutes) for each new user. Set it to
zero to set unlimited lease time. The

command sets the default

lease time to five.

users default-setting [no] logon-re-auth-time

<0..1440>

Sets the default reauthorization time (in minutes) for each new
user. Set it to zero to set unlimited reauthorization time. The

command sets the default reauthorization time to thirty.

users default-setting [no] user-type <admin

user>

Sets the default user type for each new user. The

command sets

the default user type to user.

users default-setting [no] user-type <admin

user> logon-lease-time <0..1440>

Sets the default lease time (in minutes) for each type of new user.
Set it to zero for unlimited lease time. The

command sets the

default lease time to five.

Summary of Contents for ZyWALL USG Series











































































































































































































































































































































































































































Search results

Summary of Contents for ZyWALL USG Series

Reviews:

Related manuals for ZyWALL USG Series

Brands by name

Popular brands

ZyXEL Communications ZyWALL USG Series, Reference Manual

Search results

Summary of Contents for ZyWALL USG Series

Reviews:

Related manuals for ZyWALL USG Series

Brands by name

Popular brands