Chapter 15 Route
ZyWALL / USG (ZLD) CLI Reference Guide
122
[no] schedule
schedule_object
Sets the schedule. The
no
command removes the schedule setting to
the default (
none
).
none
means any time.
[no] service {
service_name
|any}
Sets the IP protocol. The
no
command resets service settings to the
default (
any
).
any
means all services.
[no] snat {outgoing-interface|pool
{
address_object
}}
Sets the source IP address of the matched packets that use SNAT. The
no
command removes source NAT settings from the rule.
[no] source {
address_object
|any}
Sets the source IP address that the matched packets must have. The
no
command resets the source IP address to the default (
any
).
any
means all IP addresses.
[no] srcport {
profile_name
|any}
Sets the source port that the matched packets must have. The
no
command resets the source port to the default (
any
).
any
means all
ports.
[no] sslvpn
tunnel_name
Sets the incoming interface to an SSL VPN tunnel. The
no
command
removes the SSL VPN tunnel through which the incoming packets are
received.
[no] tunnel
tunnel_name
Sets the incoming interface to an IPSec VPN tunnel. The
no
command
removes the IPSec VPN tunnel through which the incoming packets are
received.
[no] user
user_name
Sets the user name. The
no
command resets the user name to the
default (
any
).
any
means all users.
policy6 {
policy_number
| append
| insert
policy_number
}
Enters the IPv6 policy-route sub-command mode to configure, add or
insert a policy.
[no] deactivate
Disables the specified policy. The
no
command enables the specified
policy.
[no] description
description
Sets a descriptive name for the IPv6 policy. The
no
command removes
the name for the policy.
[no] destination {
address6_object
|any}
Sets the destination IPv6 IP address the matched packets must have.
The no command resets the destination IP address to the default
(
any
).
any
means all IP addresses.
[no] dscp {any | <0..63>}
Sets a custom DSCP code point (0~63). This is the DSCP value of
incoming packets to which this policy route applies.
any
means all
DSCP value or no DSCP marker.
[no] dscp class {default |
dscp_class
}
Sets a DSCP class. Use
default
to apply this policy route to incoming
packets that are marked with DSCP value 0. Use one of the pre-
defined AF classes (including af11~af13, af21~af23, af31~af33, and
af41~af43) to apply this policy route to incoming packets that are
marked with the DSCP AF class.
The “af” entries stand for Assured Forwarding. The number following
the “af” identifies one of four classes and one of three drop
preferences. See
Assured Forwarding (AF) PHB for DiffServ on page
dscp_class
can set cs0~cs7 too.
dscp-marking <0..63>
Sets a DSCP value to have the ZyWALL / USG apply that DSCP value to
the route’s outgoing packets.
Table 60
Command Summary: Policy Route (continued)
COMMAND
DESCRIPTION
Summary of Contents for ZyWALL USG Series
