Chapter 6 Connection Status
WX Series User’s Guide
91
Fig ure 42
LAN Setup
Each field is described in the following table.
Table 17 Status Screen
LABEL
DESC RIPTIO N
LAN IP Setup
IP Address
Enter the LAN IPv4 address you want to assign to your WX Device in dotted decimal
notation, for example, 192.168.1.2 (factory default).
Subnet Mask
Type the subnet mask of your network in dotted decimal notation, for example 255.255.255.0
(factory default). Your WX Device automatically computes the subnet mask based on the IP
address you enter, so do not change this field unless you are instructed to do so.
Save
Click
Sa ve
to save your changes.