Chapter 13 User Account
WX Series User’s Guide
136
13.2.1 Use r Ac c o unt Add/ Edit
Click
Add Ne w Ac c o unt
or the
Edit
icon of an existing account in the
Ma inte na nc e > Use r Ac c o unt
to
open the
following
screen.
Fig ure 71
Maintenance > User Account > Add/Edit
The following table describes the labels in this screen.
Idle Timeout
This field displays the length of inactive time before the WX Device will automatically log the user
out of the Web Configurator.
Lock Period
This field displays the length of time a user must wait before attempting to log in again after a
number if consecutive wrong passwords have been entered as defined in
Re try Tim e s
.
Group
This field displays whether this user has
Adm inistra to r
or
Use r
privileges.
Modify
Click the
Ed it
icon to configure the entry.
Click the
De le te
icon to remove the entry.
Cancel
Click
C a nc e l
to restore the default or previously saved settings.
Apply
Click
Apply
to save your changes.
Table 38 Maintenance > User Account (continued)
LABEL
DESC RIPTIO N
Table 39 Maintenance > User Account > Add/Edit
LABEL
DESC RIPTIO N
Active
Select
Ena b le
or
Disa b le
to activate or deactivate the user account.
User Name
Enter a new name for the account. The
Use r Na m e
must contain 1 to 15 characters, including 0
to 9, a to z, and !@#%*()-_+=~,.{}[]\. Spaces are not allowed.
Password
Type your new system password. The
Pa sswo rd
must contain 6 to 64 characters, including 0 to 9
and a to z. Note that as you type a password, the screen displays a (*) for each character you
type. After you change the password, use the new password to access the WX Device.
Verify Password
Type the new password again for confirmation.
