ZyXEL Communications USG-300 - V2.20 ED 2, Manual

Page: 639 / 1149

Chapter 35 ADP
ZyWALL USG 300 User’s Guide
639
35.2 The ADP General Screen
Click Configuration > Anti-X > ADP > General . Use this screen to turn
anomaly detection on or off and apply anomaly profiles to traffic directions.
Figure 444 Configuration > Anti-X > ADP > General
The following table describes the screens in this screen.
Table 171 Configuration > Anti-X > ADP > General
LABEL DESCRIPTION
General Settings
Enable
Anomaly
Detection
Select this check box to enable traffic anomaly and protocol anomaly
detection.
Policies Use this list to specify which anomaly profile the ZyWALL uses for
traffic flowing in a specific direction. Edit the policies directly in the
table.
Add Click this to create a new entry. Select an entry and click Add to
create a new entry after the selected entry.
Edit Select an entry and click this to be able to modify it.
Remove Select an entry and click this to delete it.
Activate To turn on an entry, select it and click Activate .
Inactivate To turn off an entry, select it and click Inactivate .
Move To change an entry’s position in the numbered list, select it and click
Move to display a field to type a number for where you want to put
that entry and press [ENTER] to move the entry to the number that
you typed.
# This is the entry’s index number in the list.
Priority This is the rank in the list of anomaly profile policies. The list is
applied in order of priority.
Status The activate (light bulb) icon is lit when the entry is active and
dimmed when the entry is inactive.