ZyXEL Communications USG-300 - V2.20 ED 2, Manual

Page: 989 / 1149

Appendix A Log Descriptions
ZyWALL USG 300 User’s Guide
989
Can't use MULTICAST IP
for destination
The connectivity check process can't use multicast address to
check link-status.
The destination is
invalid, because
destination IP is
broadcast IP
The connectivity check process can't use broadcast address to
check link-status.
Can't get MAC address
of %s interface!
The connectivity check process can't get MAC address of
interface.
%s: interface name
To send ARP REQUEST
error!
The connectivity check process can't send ARP request
packet.
The %s routing status
seted to DEAD by
connectivity-check
The interface routing can't forward packet.
%s: interface name
The %s routing status
seted ACTIVATE by
connectivity-check
The interface routing can forward packet.
%s: interface name
The link status of %s
interface is inactive
The specified interface failed a connectivity check.
Table 296 Device HA Logs
LOG MESSAGE DESCRIPTION
Device HA VRRP Group
%s has been added.
An VRRP group has been created, %s: the name of VRRP
group.
Device HA VRRP group
%s has been modified.
An VRRP group has been modified, %s: the name of VRRP
group.
Device HA VRRP group
%s has been deleted.
An VRRP group has been deleted, %s: the name of VRRP
group.
Device HA VRRP
interface %s for VRRP
Group %s has changed.
Configuration of an interface that belonged to a VRRP group
has been changed, 1st %s: VRRP interface name, 2ed %s:
%s: the name of VRRP group.
Device HA syncing from
%s starts.
Device HA Syncing from Master starts when user click "Sync
Now" using Auto Sync, %s: The IP of FQDN of Master.
%s has no file to
sync, Skip syncing it
for %s.
There is no file to be synchronized from the Master when
syncing a object (AV/AS/IDP/Certificate/System
Configuration), But in fact, there should be something in the
Master for the device to synchronize with, 1st %s: The
syncing object, 2ed %s: The feature name for the syncing
object.
Master configuration
is the same with
Backup. Skip updating
it.
The System Startup configuration file synchronized from the
Master is the same with the one in the Backup, so the
configuration does not have to be updated.
Table 295 Connectivity Check Logs (continued)
LOG MESSAGE DESCRIPTION