manualshive.com logo in svg

ZyXEL Communications USG-300 - V2.20 ED 2, Manual

Share
Download
ZyXEL Communications USG-300 - V2.20 ED 2 Manual Download Page 1001

 Appendix A Log Descriptions

ZyWALL USG 300 User’s Guide

1001

"SIM card has been 

successfully unlocked 

by PUK code on 

interface cellular%d.

You entered the correct PUK code and unlocked the SIM card 
for the cellular device associated with the listed cellular 
interface (%d).

"Incorrect PUK code of 

interface cellular%d. 

Please check the PUK 

code setting.

You entered an incorrect PUK code so you were not able to 
unlock the SIM card for the cellular device associated with the 
listed cellular interface (%d).

"SIM card of interface 

cellular%d in %s is 

damaged or not 

inserted. Please 

remove the device, 

then check the SIM 

card.

The SIM card for the cellular device associated with the listed 
cellular interface (%d) cannot be detected. The SIM card may 
be missing, not inserted properly, or damaged. Remove the 
device and check its SIM card. If it does not appear to be 
damaged, try re-inserting the SIM card.

"SIM card of interface 

cellular%d in %s is 

locked. Please enter 

PUK code to unlock.

The SIM card for the cellular device associated with the listed 
cellular interface (%d) is locked. This may be because the PIN 
code was entered incorrectly more than three times. You need 
to enter the PUK code to unlock the SIM card. .

"Incorrect PIN code of 

interface cellular%d. 

Please check the PIN 

code setting.

The listed cellular interface (%d) does has the wrong PIN 
code configured.

"Unable to query the 

signal quality from 

the device in %s. 

Please try to remove 

then insert the 

device.

The ZyWALL could not check the signal strength for the listed 
cellular interface (%d). This could be due to an error or being 
out of range of the ISP’s cellular station.

"Interface cellular%d 

cannot connect to the 

service provider.

The listed cellular interface (%d) cannot connect to the ISP. 
This could be due to an error or being out of range of the 
ISP’s cellular station.

"Interface cellular%d 

is configured with 

incorrect APN.

The listed cellular interface (%d) does not have the correct 
APN (Access Point Name) configured.

"Interface cellular%d 

is configured with 

incorrect phone 

number.

The listed cellular interface (%d) does not have the correct 
phone number configured.

"Interface cellular%d 

is configured with 

incorrect username or 

password.

The listed cellular interface (%d) does not have the correct 
user name and password configured.

"Interface cellular%d 

is configured with 

device %s, but current 

inserted device is %s.

The listed cellular interface (%d) is configured for a particular 
cellular device (first %s), but a different cellular device 
(second %s) is inserted.

"Cellular device [%s 

%s] has been inserted 

into %s.

The cellular device (identified by its manufacturer and model) 
has been inserted in or connected to the specified slot.

Table 300   

Interface Logs (continued)

LOG MESSAGE

DESCRIPTION

Summary of Contents for USG-300 - V2.20 ED 2






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands