manualshive.com logo in svg

ZyXEL Communications USG-300 - V2.20 ED 2, Manual

Share
Download
ZyXEL Communications USG-300 - V2.20 ED 2 Manual Download Page 998

Appendix A Log Descriptions

ZyWALL USG 300 User’s Guide

998

 

25

Database method failed due to timeout.

26

Database method failed.

27

Path was not verified.

28

Maximum path length reached.

Table 300   

Interface Logs

LOG MESSAGE

DESCRIPTION

Interface %s has been 

deleted.

An administrator deleted an interface. %s is the interface 
name.

AUX Interface dialing 

failed. This AUX 

interface is not 

enabled.

A user tried to dial the AUX interface, but the AUX interface is 
not enabled.

AUX Interface 

disconnecting failed. 

This AUX interface is 

not enabled.

The AUX interface is not enabled and a user tried to use the 
disconnect aux command.

Please type phone 

number of interface 

AUX first then dial 

again.

A user tried to dial the AUX interface, but the AUX interface 
does not have a phone number set.

Please type phone 

number of Interface 

AUX first then 

disconnect again.

The AUX interface does not have a phone number set and a 
user tried to use the disconnect aux command.

Interface %s will 

reapply because Device 

HA become active 

status.

Device-ha became active and is using a PPP base interface, 
the PPP interface must reapply, %s is the interface name.

Interface %s will 

reapply because Device 

HA is not running.

Device-ha was deleted and free PPP base interface, PPP 
interface must reapply, %s is the interface name.

Interface %s will stop 

connect because Device 

HA become standby 

status.

When device-ha is stand-by and use PPP base interface, PPP 
interface connection will stop, 

%s

: interface name.

Create interface %s 

has been failed.

When PPP can't running fail, 

%s

: interface name.

Base interface %s is 

disabled. Interface %s 

is disabled now.

When user disable ethernet, vlan or bridge interface and this 
interface is base interface of PPP or virtual interface. PPP and 
virtual will disable too. 1st %s is interface name, 2nd %s is 
interface.

Interface %s has been 

changed.

An administrator changed an interface’s configuration.

 %s

: 

interface name.

Interface %s has been 

added.

An administrator added a new interface. 

%s

: interface name.

CODE

DESCRIPTION

Summary of Contents for USG-300 - V2.20 ED 2






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands